Similar to the situation with other human activities, the coronavirus pandemic has put to test the regulator ability to adapt and retain effective performance under extreme conditions. The emergency procedures are normally developed to respond to human-induced disasters, and to the nuclear facility accidents initiated by natural or human-made events. […]
Архивы по годам: 2020

A leak suspected to have been caused by high cycle thermal fatigue due to fluctuating axial motion of a swirl penetration front end has been detected in early 2018 in a non-isolable Reactor Coolant System branch at the Doel 1 Nuclear Power Plant (Belgium). As a part of the standard […]
Thermal Fatigue issue in the Upper Plenum Injection lines at ...
Russian federal nuclear safety rules and regulations ‘Basic Safety Provisions for Nuclear Power Plants’ (NP-001-15) establish a requirement to complement the safety analysis for a nuclear power plant with estimation of errors and uncertainties in the obtained results. Similar requirements can be found in regulatory documents of nuclear safety authorities […]
Russia has Developed Guidance on Estimation of Errors and Uncertainties ...

The reactor pressure vessel (RPV) is the most critical component of light water reactors with regard to plant safety and lifetime. The Nickel-base Alloy 182 is widely used as a weld filler and attachment pad metal to join the low-alloy steel RPV and RPV nozzles to both wrought nickel-base alloys […]
Assessment of stress corrosion cracking incidents in Alloy 182: reactor ...

One of the key duties of a nuclear safety authority is to ascertain the nuclear facility safety. Computational modeling of credible operational transients and accidents that may occur at a nuclear facility is imperative for demonstrating its nuclear and radiological safety. Software developers conduct a broad spectrum of computational and […]
The First Stage in Digitizing the Expert Review of Software

MYRRHA (Multipurpose hYbrid Research Reactor for High-tec Applications) is a unique highly innovative prototype of a nuclear reactor driven by a high power linear accelerator. It will be designed to operate in both critical (no accelerator needed) and subcritical mode. MYRRHA has a fast spectrum core cooled by Lead Bismuth […]
The MYRRHA Project, an innovative Lead-Bismuth cooled reactor
В ближайшие годы Великобритания будет возвращать остеклованные высокоактивные отходы в Германию. Отходы являются результатом переработки и рециклирования отработавшего ядерного топлива в Селлафилде (Западная Камбрия), которое ранее использовалось для производства электроэнергии на предприятиях Германии. Всего будет осуществлено 3 поставки в федеральные хранилища в Германии, и в настоящее время ведется подготовка к […]
Возвращение остеклованных отходов в Германию

Компания «TerraPower» объявила о планах объединения с компанией «Centrus Energy», поставщиком ядерного топлива и услуг, для создания промышленных мощностей по производству низкообогащенного урана (high-assay, low-enriched uranium, HALEU) на внутреннем рынке. Это потребуется для топлива многих конструкций реакторов следующего поколения, включая недавно объявленную систему хранения энергии Natrium (Natrium Power Storage System), […]
Создание мощностей для производства топлива HALEU

Компания «Kansai Electric Power Company» объявила о завершении работ по повышению безопасности, позволяющих энергоблокам АЭС «Михама-3» и «Такахама-1» проработать ещё 20 лет, т.е. до 60 лет. Продолжаются работы по продлению срока эксплуатации блока АЭС «Такахама-2». АЭС находятся в префектуре Фукуи. Согласно пересмотренным правилам, вступившим в силу в июле 2013 г., […]
Япония. Повышение безопасности для продления срока службы АЭС

Китайская национальная ядерная корпорация (China National Nuclear Corporationю, CNNC) объявила, что начался процесс загрузки 177 тепловыделяющих сборок в активную зону реактора АЭС «Фуцин-5». Блок является первым из двух демонстрационных реакторов Hualong One на площадке в провинции Фуцзянь. Его планируется ввести в эксплуатацию к концу 2020 г. Первая тепловыделяющая сборка была […]